This was my first time painting a vehicle, and I learned a lot along the way. Here is a list of all the supplies I used to paint Rusty, along with some notes on what worked well and what didn't.
As for quanties, keep in mind that I sprayed a good amount of the interior as well.
- Goof Off
- Custom Shop Series Wax and Grease Remover
- Eastwood Epoxy Primer. 1 gallon was just enough.
- Evercoat Body Filler
- Evercoat ZGrip Glazing Putty
- Primer
- UPOL System 20 High Build Primer (UP2253V)
- UPOL System 20 Hardener (UP2391)
- I used just over 2 gallons.
- Spralac Polyurethane Topcoat (SP-150)
- Assuan Brown
- Samos Beige
- Valspar Hardener
- GM Urethane Reducer (Medium)
- 3M Gun Cleaner
- 3M PPS Cups - 22oz. I used just shy of 50
- Devilblis FLG4
- 1.8mm tip for primer
- 1.3mm tip for topcoat
- #M Urethane Seam Sealer 08367 & 08365
- 3M Fullface respirator 6800
- 3m Plastic sheeting, the treated kind that traps overspray